About Us

Rat Pedals lab is located in Athens, Greece.
Effect pedals are our passion.
With the satisfaction of creating and building units completely by hand, Rat Pedals stomp boxes are definitely not a factory line product.
Through long nights of gigging and the usual demands and hazards, these units have proven themselves time and time again to be able to handle the high expectations of experienced musician.

010715
  • sb-1color01sb-1silver01

    SB-1 Booster

    €150.00
    Designed to give guitar players the maximum range of tone enhancement and signal amplification options, the SB-1 Booster does wonders to any rig. The SB-1 uses two JFET transistors and trimpots for each, ensuring precision matching for the best sounding boost available.Adjusting the two switches on the right you have the choice for a fat/smooth/extra boosted signal. Features
    • CNC engraved
    • True Bypass
    • Controls: Boost knob, toggle extra gain switch, toggle high cut switch
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
      As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • sd-1color01sd-1silver01

    SD-1 Delay

    €170.00
    SD-1 is a natural sounding hybrid (digital/analog) delay, with analog direct signal path. The SD-1 Delay has about the same bandwidth as the classic tape echo units, and it can be used in front of an amplifier or in amplifier effects loops. Features
    • CNC engraved
    • True Bypass
    • Controls: Delay, Feedback, Mix
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • sdt-1color02sdt-1silver01

    SDT-1 Distortion

    €170.00
    SDT-1 is a single channel medium gain distortion pedal. It covers so much ground, from a nice light overdrive, to full chunky distortion tones. The dynamics and transparency that SDT-1 offers are second to none. Features
    • CNC engraved
    • True Bypass
    • Controls: Gain, Tone, Volume
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • fingerprint

    The Fingerprint

    €170.00
    The Fingerprint is a dual stage overdrive pedal. It provides a variety of overdrive textures through the Pre and Post Gain controls An extra feature ,the diode selection switch transforms the pedal from a musical ,soft , mellow classic , to a modern aggressive overdrive   Features
    • CNC engraved
    • True Bypass
    • Controls: Pre Gain, Post Gain , Tone, Level , Diode selection switch
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • st-1color01st-1silver01

    ST-1 Tremolo

    €150.00
    ST-1 is a tremolo pedal which gives you full control over your sound: volume, depth and speed.It is designed to be very simple to use, but also very flexible and powerful effect.And all this features in a full-analog circuit, to deliver the best sound quality! Specifications
    • CNC engraved
    • True Bypass
    • Controls: Volume, Speed, Depth
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • chdcolor1chdsilver01

    CHD Distortion

    €170.00
    CHD Distortion is a modern high-gain distortion pedal with unparalleled clarity and definition.This pedal was developed for high gain applications and specifically for clarity at heavy distortion levels.With the gain turned down, the CHD Distortion approaches overdrive-like textures and responds to the players touch and dynamics. Features
    • CNC engraved
    • True Bypass
    • Controls: Gain, Tone, Level
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 60 x 34 mm
      As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • ente-la-magkente

    Ente la magkente

    €250.00
    Ente la magkente provides 32 different digital audio effects switchable through a 16 position rotary switch and a toggle switch to choose one of the two banks. Equipped with the superb quality digital effects processing engine which adds that extra punch needed to make audio presentations truly stand out. A powerful three band EQ gives you a full control over your signal. The Mix knob adjusts the Dry/Wet ratio. The Level knob adjusts the output of the pedal. Ente la magkente provides an extra feature which makes it a useful tool for the professional musician, a built in DI box with a balanced XLR output and a ground lift switch. The DI performs level matching, balancing, and active buffering impedance matching/impedance bridging to minimize noise, distortion and ground loops.
    Specs:
    • 32 effect Presets
    • 2 bank directories
    • Analog signal path
    • 48 Khz Sampling Rate
    • True Bypass
      As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • liquido01

    Liquido DSP

    €250.00
    Liquido DSP provides 32 different digital audio effects switchable through a 16 position rotary switch and a toggle switch to choose one of the two banks. Equipped with the superb quality digital effects processing engine which adds that extra punch needed to make audio presentations truly stand out.
    Specs:
    • 32 effect Presets
    • 2 bank directories
    • Analog signal path
    • 48 Khz Sampling Rate
    • Stereo out
    • True Bypass
    • Individual settings for Out A and Out B
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • socolor1so-1silver01

    SO-1 Overdrive

    €170.00
    SO-1 is a booster/overdrive-type distortion box, which provides a soundscape ranging from mild clean boosting to fuzz-type distortion.The extra Boost footswitch gives you the choice for extra boost when you need it. Features
    • CNC engraved
    • True Bypass
    • Controls: Gain, Tone, Volume
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 120 x 90 x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • vb-1-01

    VB-1 Booster

    €200.00
    VB-1 is a true vintage style Booster pedal. It is made on a point to point handmade turret board. The capacitors are NOS parts from USSR.The resistors are DALE from USA. The heart of the pedal is a NOS military specs GT404 Germanium transistor. The VB-1 Booster features two knobs. The Boost knob which adjusts the overall signal level and the Voice knob  is a 4 pole position switch. With the Voice knob you have 4 options:
    1. Bass boosted signal
    2. Extra Bass boosted signal
    3. Flat boosted signal
    4. Mids boosted signal with extra boost
    Inside of the pedal you can see a trim pot.This trimmer adjusts the input signal. VB-1 Booster is a limited edition model of 50 pieces production only. Features
    • CNC engraved
    • True Bypass
    • Controls: Voice, Boost
    • It works with a 9V DC adaptor
    • Limited Life time warranty
    • Dimensions: 110 x 6x 34 mm
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • vf-1-01
    Out of stock

    VF-1 Fuzz

    €200.00
    VF-1 is a limited edition Germanium Fuzz pedal. The heart of the pedal are two hand selected and matched germanium transistors.All the circuit is made on a handmade eyelet point to point board. Vintage sounding Fuzz tones from a real vintage circuit! Specs: Dale resistors NOS military specs capacitors NOS Russian germanium transistors. Internal bias trim pot. Features
    • CNC engraved
    • True Bypass
    • Controls: Fuzz, Level
    • It works with a 9V DC adaptor positive center polarity
    • Dimensions: 110 x 60 x 34 mm
    • Limited Life time warranty
    As each pedal is handmade and unique , there might be slight differences from the product in the picture above.(Color texture, etc..)
  • chdpremiumsb1premium

    Premium edition

    €200.00
    Our custom shop produces the Rat Pedals Premium edition. Hand selected premium solid blocks of  Iroko wood precision milled with CNC. Each pedal is unique .You will receive the exact product you see in the picture.